Upgrading your exterior walls: How to plaster exterior walls. In this short guide, we will give you step-by-step instructions on how to make some fine adjustments to your exterior walls.

If you are so consumed with the interior design of your home that you don't pay attention to how to apply stucco to improve the exterior. Stucco is made of Portland sand, lime, cement and water. It is an excellent finishing material that can help you improve the appearance of exterior walls.

Upgrading your exterior walls: How to plaster exterior walls - Decorative Material

Plasterers know that it is a fine and decorative material for aesthetic finishes. Compared to cement, stucco is mainly used for beautification purposes rather than building a foundation. It is a paste that can be applied to various corners and edges without disturbing the foundation.

Because the cement is hard and cannot be held vertically, stucco repair is done for damage located on the exterior surface of the house. If you have decided to stucco your exterior walls, you can hire a professional company for residential stucco in Oakville.

In this article, we have described how to apply stucco without professional help.

How to install plaster on the exterior walls of your house

Here is a guided procedure to apply stucco to the exterior walls of your house -

1. First of all, you should know that you can apply new stucco over the old. You don't have to scratch it away and start all over again. You can also do stucco repair in places where only a small amount of paste is needed.
2. Mix the stucco thoroughly. Plasterers suggest that you have the right temperature. If it is too hot, it will dry out and fall off. If it is too cold, it will not stick to the walls. The right time to apply it is on a cloudy day without much humidity.
3. An important step in learning how to apply stucco is to know that it is applied in three layers. The first two are base layers and the third is the actual layer you will see. The two layers ensure that the third layer has a solid base.
4. Once the walls are ready after cleaning and concrete bonding, the next step to install residential stucco in Oakville is to install a 17-gauge metal mesh. It will hold the plaster in place and prevent it from falling.
5. Then apply the first layer of stucco. Let it dry for a few hours. Once dry, scratch the surface with a sharp tool. It is used to hold the second layer in place. But before applying the second layer, first moisten the first layer and let it dry for a day or two.
6. Apply the second layer of stucco. Professional plasterers recommend that the next layer should be half an inch thick. Then let it dry for a day before proceeding to the finishing coat.
7. The last step is to apply the final layer of stucco with a trowel. It should be a quarter-inch thick, and then you can finally give it the desired pattern.

Upgrading your exterior walls: How to plaster exterior walls - About us

Ripstaal Group was founded in the late 1960s as a producer of metal stucco profiles. Over the years, the company has developed into a market leader in the field of finishing products for the professional construction industry. Ripstaal Group now supplies an extensive range of profiles and smart, innovative finishing products in 14 European countries.

Thanks for reading: Upgrading your exterior walls: How to plaster exterior walls.

Download the new Ripstaal stucco profiles App